Adobe Tutorial

Photoshop Tutorials

Let us start by preparing the objects of the scene we are going to create. Firstly, we will creating a castle. Make sure we have downloaded all the stock images needed. Create a new document in photoshop with size of 1600 px wide and 1800 px high. Open the castle stock image in the document.

Open the tree stock image in the document, place the image behind the tree. Scale the size of it accordingly. Give the tree layer a layer mask by clicking the mask icon located in the layer panel. Mask unneeded part of the tree image.

Duplicate (Ctrl+J) the tree image, scale its size down a bit and place the duplication behind the castle. Arrange its position as the result below:

Create a new document (Ctrl+N) with size of 1600px wide and 1808px high.

Open the grass land stock picture and extract the land from its background. Use pen magic wand tool to select the background and when the backround is selected, hit Del to clean it out

Place the extracted grass land to the new document. With free transform tool (T), scale its size to fit the canvas. Then, go to filter > blur > surface blur. Follow the screenshot below for the setting of the blur:

Then, mask the unwanted part and top most edges of the grass land. Make sure to use spatter brush for this purpose. Please see the screenshot to find out the parts to be masked (marked in red arrows).

Next, crop some part of the grass land. Use lasso tool to select the part and then hit Ctrl+J to duplicate the selection into a new single layer.

Place the cropped in front of the original layer. Scale the sizes and arrange their positions like the one shown in the screenshot:

Mask the unneeded part of the duplication layer to make it well blended:

We will add background to the scene. Open the mountain stock image. Hit Ctrl+T to activate free transform tool. Scale the size of the image by press Shift key on the keyboard while clicking, holding and dragging one of the dragging point.

The result should look like the one here:

We will mask the background of the mountain image to hide it and just the mountain part is just revealed. Click the layer mask icon in the layer panel to give the mountain layer a layer mask marked by a white thumbnail next to the layer. Mask the entire sky background of the image by stroking black color to the background.

Duplicate (Ctrl+J) the masked mountain layer and place the duplicate to the other side of the scene. Arrange its size a bit and position so it does not look uniform.

Finally, reduce the opacity of each mountain layer to just 10%.

In this step we will add cloud texture to the background. Open the stock image. Activate the rectungular marquee tool and select the cloud part of the image by clicking, holding and dragging the tool on the cloud part. Then, hit Ctrl+J to duplicate the selection into a new single layer.

Add the cloud texture to the background of the scene. Scale its size to fit the background.

Create a new layer (Shift+Ctrl+N) above the cloud texture layer. Activate gradient tool and create a gradient color on this new layer. Set the color of the gradient as the ones shown in the screenshot. Fill the new layer with gradient by clicking the top of the document, holding and dragging down to the bottom.

Set the gradient layer to soft light blending with opacity of 68%.

Give this gradient layer a layer mask and mask the red marked part of the gradient as shown in the screenshot:

Add another stock cloud image to the document to add more cloud texture.

Set the blending of this cloud layer to screen at 35% opacity.

Next, add the castle image we have created to the sceen. Scale its size and place it in the center between the two mountain.

Reduce the opacity of the castle layer to 30%

Create another new layer behind the two mountain layers. Take the brush tool and choose the one of the moon brush in the brush preset picker. With white color paint the moon on the new layer with size of about 200 pixel.

Mask the part of the moon that is visible on the wall of the castle.

With the moon layer still selected, go to layer > layer style > outer glow:

In this step we will give some highlight on the castle on which the light of the moon is strongly casted. Go again to the castle layer. Hit Ctrl on the keyboard and point the cursor to the castle layer thumbnail. When the cursor change into a pointing finger icon, click the thumbnail to load the castle a selection. When it is selected, hit Ctrl+J to duplicate the selection into a new single layer layer and give this duplication layer a clipping mask. Fill (Shift+F5) the duplicate with 50% grey. Now, activate the brush tool and choose a very soft round brush. With white color, stroke the brush on the edges of the castle.

Then, set the duplication layer to overlay at 100% opacity.

Create another new layer and make sure to give this new layer a clipping mask. Choose again a very soft round brush with opacity of 10-20%. With white color, stroke the brush on the edges of the castle to define more highlight. The blue arrows in the screenshot will guide us where to stroke the brush.

We will give a new adjustment layer and some highlight to the grounds as well. Go select the ground layer and then hit layer > new adjustment layers > hue/saturation. Make sure to give this adjustment layer a clipping mask. Finally, create a new layer above the adjustment layer and give this new layer a clipping mask. Give some highlight to the ground as the same way we have created in the previous step 11.

Do the same as well to the other ground layer:

Here is the result should look so far:

We need to complete the composition of the background by add more castles in the distance. To do this purpose, we will just simply duplicate the castle and add the duplicates in the distance. Scale down their sizes and reduce the opacities to 10-20%

Open the path stock image in the document. Place the image behind the ground layers.

Scale down the size of the image and place it on the right side of the scene. Mask almost the entire image and only the fence is revealed. We can see the result as shown in the screenshot:

Duplicate the path image and place the duplicate where needed. With the same way as in the previous step, add more fences to the scene:

In this step we will add path on the ground. Duplicate the path image and place the duplicate above the ground layer.

Mask the unneeded part of the path image to reveal just the path and set the opacity of this layer to 50% in normal blending.

Now we will prepare the trees to be added to the scene. We will paint the trees. Firatly, create a new document (Ctrl+N) with size of 1600px wide and 1800px high. To get idea of what the tree should look like, take a look the tree stock image as reference. Then, with color #211e15, paint the tree as the one shown in the screenshot.

Activate dodge tool and set the tool as shown below:

Start define the highlight of the tree by stroking and clicking the dodge tool on the tree.

Give the tree more highlight where needed:

Keep on stroking and clicking the tool to define more highlight. Try to vary the size of the brush and range of the tool by switching to shadow > midtones > highlight. Use the burn tool as well to give parts of the tree some shading.

This is the tree I have created:

Then, open the texture stock image on the tree document. Scale the size of this image (1). Create a clipping mask for this texture layer (2). Finally, set the blending of this layer to soft light at 68% opacity.

Create a new layer and give this new layer a clipping mask. Take a very soft round brush and set the brush at 10-20% opacity. With white color, stroke the brush on the edges of the tree to give more highlight. There, we have a new tree now. Select all the tree layer and hit Ctrl+G to group them.

Finally, add the tree group to the main document.

With the same ways as in the previous step on how to create a tree, create another tree and add the tree to the right side of the scene.

Create the other tree from the tree brush. Make sure we have downloaded and installed the brush. Paint again the other tree.

SAdd some more distant trees to the scene.

In this step we will add foregrounds for the scene. Go to the cropped grass land layer again. Duplicate the layer two times. Then, place the duplicates above the main tree group layers. The screenshot below will guide us where the duplicates should be placed:

Now we will add a model to the scene. Firstly, open the model stock image. Take the pen tool, and with the tool, start tracing the model by clicking the edges of the model to create anchor points (I started the anchor point on the head). Keep on tracing until the path is closed which indicated by a thin line around the model.

Right click on the path to show path command options. Choose make path selection to change the path into a seletion. Hit Shift+Ctrl+I to inverse the selection and hit Dell to clean the background:

Scale the model to the size needed:

In this step we will add ties to the model’s swing. Firstly, cut out the part of the swing’s rope.

Place the cut out on the branch of the tree on which the rope should be tied. Activate free transform tool and warp the rope to bend it a bit.
Cut out again the rope of the swing into a small piece. Duplicate the cut out some times as needed. Place each duplication above one to another to create the tie:

Finally, add more ropes to complete the swing:

In this step we will paint more cloud to the scene. Take brush tool and set the brush preset as the ones below:

Set the opacity of the brush between 20-30% . Then, on a new layer paint white cloud for the scene.

Now we will add new adjustment layers to the scene. Go to layer > new adjustment layer > color balance. Set this adjustment layer to normal blending at 100% opacity

Then, give another adjustment layer: curves. Set this adjustment layer to normal at 60% opacity.

This is the result should look like after adding the adjustments:

Select the curves layer in the layer panel. Mask some areas (indicated by the red mark in the screenshot). Use a very soft round brush to mask the areas.

This is the result should look like:

Create a new layer above the two adjustment layers. Activate the brush tool. Choose a very soft round brush with opacity about 20-30%opacity. On the new layer, paint black transparent color to the edges of the scene. Then, to complete the composition, add some birds to the trees. Place the bird layers below the adjustment layers.

Now create again a new layer above all the other layers. Fill the new layer with black. Set this layer to color dodge blending with 100% opacity. Take the brush tool. Set the opacity of the brush to 5-10% and choose a very soft round brush. With white color, paint the windows of the castle to give them light and give some highlight to the grounds as well. Here is the layer should look like in normal blending:

And here is the result will look like when the layer set to color dodge:

Next, we will give another new adjustment layer to the scene. Go to layer > new adjustment layers > curve. For this curves layer, give it normal blending at 90% opacity.

Hit Shift+Ctrl+Alt+E to stamp all the visible layers. This will create a new single layer of the scene we have created. Right click the stamp layer to show the layer command options. Choose convert to smart object. This will convert the layer into a smart object layer.

Then, go to filter > others > high pass. This will give the smart object layer a smart filter: high pass.

Point the cursor to the visible high pass filter in the layer panel, right click on it to show the filter command options. Choose Edit Smart Filter Blending Option…

Then set the blending to multiply at 100% opacity.

This is the result will look like:

Click the filter mask thumbnail to mask the effect of the filter. Mask on the red marked areas. Use a very soft round brush to mask the areas.

The result should look like this now:

You can view the final outcome below. I hope that you enjoyed this tutorial and would love to hear your feedback on the techniques and outcome.