Thursday, April 30, 2015

How to Create Vector in Illustrator CS6

Final Product  Vector in Illustrator CS6 What Youll Be Creating

Create Vector in Illustrator CS6
In this tutorial I will take you through the steps and techniques of creating a golden compass. For this tutorial I’ve used just Adobe Illustrator CS6 . Let’s get stared!

Step 1 Create Vector in Illustrator CS6

Create a circle (width 367px) with fill color and no stroke by using the Ellipse Tool (M). Make sure to press Shift while you create it so you get a perfect circle and apply a radial gradient, as shown in below.
Create Vector in Illustrator CS6

Step 2 Create Vector in Illustrator CS6

Let’s start with the markings. Create a rectangle (L) at a width of 0.688 and height of 13.044 – towards the upper side of the circle and replicate it towards the lower side (hold the Alt + Shift while you select and drag the upper one downwards).
Create Vector in Illustrator CS6

Step 3 Create Vector in Illustrator CS6

Select the rectangles using the Selection Tool (V). Group them together and align the two of them and the circle both horizontally and vertically on the center.
Create Vector in Illustrator CS6  

Step 4 Create Vector in Illustrator CS6

Select the rectangles (V) and rotate them using the Rotate Tool (Right-click > Transform > Rotate) by 1 degree and click copy in the Rotate Tool Dialog Box.
Create Vector in Illustrator CS6  

Step 5 Create Vector in Illustrator CS6

Now press Command + D to repeat the rotate copy, and repeat until you get to complete a circle made of small markers, as shown below.
Create Vector in Illustrator CS6



Step 6 Create Vector in Illustrator CS6

Select the middle rectangle from the top using the Selection Tool and enlarge its size downwards so this one stands out. You do this by dragging downwards with the Selection Tool (V) while you press the Shift key.
Create Vector in Illustrator CS6



Step 7  Create Vector in Illustrator CS6

While this marker is selected, copy and drag it downwards. Make sure you press both Alt + Shift while you drag it so it will be centered with the upper one. Once you’ve reached the bottom group them together (Command + G).
Create Vector in Illustrator CS6

Step 8

Rotate the group by an increment of 20 degrees (Right-click > Transform > Rotate) and press copy in the Dialog Box.
image

Step 9

Duplicate the action in Step 8 until you covered all the circle by using Command + D.
image

Step 10

Now that we have the markers for the 20 increments, we’ll need the ones for the 10 increments. Select the center marker with the Selection Tool (V), copy and paste in front (Command + C and Command + F), then drag it from the bottom upwards by holding the Shift key so that the size is in between the small and big markers.
image

Step 11

Select the new marker with the Selection Tool and copy it downwards by dragging it while holding Alt + Shift.
image

Step 12

Group both of them (Command + G) and rotate by 10 degrees (Right-click > Transform > Rotate). This time in the Rotate Panel click OO.
image

Step 13

Select the rotated one group and rotate it again with 20 degrees, like in step 12 but this time press Copy in the Rotate Panel. Repeat (Command + D) until you get a full circle.
image

Step 14

Prepare for the text by drawing a circle inside using the Ellipse Tool (L) inside the big one and center align it with the rest
image

Step 15

While keeping the circle selected use the Type on a Path Tool to write the numbers on the circle that you’ve just created.
image

Step 16

Continue to create these numbers in increments of 20 until you are finished.
image

Step 17

Create a star with four corners by using the Star Tool. Play around with the arrows and Command while you draw it. The one I drew is 225,887px wide.
image

Step 18

Now that we have a start we need to color each corner in two so we’ll have to divide it on the middle:

  1. Draw an empty line using the Line Segment Tool () that is longer than the vertical of the star.
  2. Copy the line and Paste in Front (Command + C and Command + F) and rotate the new one by 45 degrees using Selection Tool (V), while holding the Shift key.
  3. Repeat step 1 and 2 until you have four lines.
  4. Select the lines and the star and center align them both horizontal and vertical.
  5. With the lines and the star selected In the Pathfinder Panel (Shift + Command + F9) press divide.
image

Step 19

  1. Color the sections of the star using the Direct Selection Tool and the colors of your choice.
  2. Copy and Paste in Front (Command + C and Command + F) the colored star and rotate it 45 degrees using the Selection Tool (V) while holding the Shift Key.
  3. Make the new star smaller using the Selection Key (V) and Shift + Alt.
image

Step 20

Delete three sides of the smaller star and leave just one. Select the two anchor points you see in the above image using the Direct Selection Tool (A). Then use the Selection Tool (V) to drag the upper-right while holding the Shift key until they intersect the bigger star.
image

Step 21

  1. Select the remaining part of the small star using the Selection Tool (V), press R and drag towards the middle of the big star while holding down the Alt key.
  2. Once you do that enter 90 in the Rotate Dialog Box and press Copy.
  3. Repeat (Command + D) until you get a full star again.
image

Step 22

Using the Text Tool (T) enter all the text (“N,” “E,” “S,” “W,” etc…)
image

Step 23

Now that we’ve created the direction markers we need to create the mobile part of the compass. Enter the group containing the big star, copy the horizontal segment (Command + C), and paste it (Command + V). Now Select the upper two anchor points using the Direct Selection Tool (A), then Right-click > Average > Both.
image

Step 24

Add some color to the segment to make it stand out. I’ve added the colors, as shown below.
image

Step 25

Using the Ellipse Tool (L) while you hold the Shift key you add two concentric circles to the center part of the mobile segment. In the image below you can see the colors I’ve used for the radial gradients, but you can also access the source files available for all Vector Plus Members.
image

Step 26

Group (Command + G) all the elements drawn up to now together.

Step 27

Let’s create the golden frame of the compass. Create four circles using the Ellipse Tool (L) while you hold the Shift key. Start with creating the widest and finish with the smallest. I’ve created mine with the following widths:469px, 460px, 449px, and 393px.
image

Step 28

Now let’s add some gradients and group the circles together. The swatches I’ve used are available for the Vector Plus Members in the original format.
image

Step 29

Select both the golden part and the other and arrange them using the Selection Tool (V) until you get a similar illustration to that shown below.
image

Step 30

Lets add a shadow to the compass:
  1. Create a white circle using the Ellipse Tool (L).
  2. Use the Mesh Tool (U) to add 4 mesh points.
  3. Use the Direction Selection Tool (A) to select the mesh points and then add the color: #4d4d4d to the center mesh point and #f2f2f2 to the outer mesh points.
  4. After you are satisfied with the colors, select the circle using the Selection Tool (V) and transform it into an ellipse as shown.
image
image

Conclusion

Finally add the ellipse under the compass and position it so you can emulate a light source that created a shadow. Here is the image I’ve obtained.
image
Subscribe to the Vectortuts+ RSS Feed to stay up to date with the latest vector tutorials and articles.

0 comments:

Post a Comment

 
;